Contact Zebra
  1. United States
  2. US Home Page (REBRANDED)
  3. Solutions
  4. Workforce Connect
  5. Workforce Connect Voice Client 9.x Administrator Guide for Asterisk
  6. Configure the Asterisk PBX
  7. Enabling TCP As Signaling Transport Protocol
  • Workforce Connect Voice Client 9.x
Enabling TCP As Signaling Transport Protocol
Enabling TCP As Signaling Transport Protocol
To enable TCP as signaling transport protocol using the command line interface.
Go to the command line interface (CLI) and enter the following:
srv# cat /etc/asterisk/sip_custom.conf tcpenable=yes tcpbindaddr=0.0.0.0 srv# asterisk -x "sip reload"
Press
Enter
 .